Get the enclosure you want modified and delivered to your specifications

Consider how much easier it would be to place one order with us, saving your team time and money by leaving the heavy lifting to one of our trusted vendors be it Hammond Mfg., Bud Industries, Weidmuller, or Amerimation. They do the prep time, layout, drilling, tapping, cutting, painting, assembly, and any extra product handling allowing you to focus on the more important aspects of your project.

We have an extensive track record delivering high quality value-added services to numerous OEMs and we are confident we can deliver the best in factory quality modified enclosures to move your project forward.

Check out what our vendors have to offer by following one of the links below:
Hammond Modification Services
Bud Industries Electronic Enclosure Modifications
Weidmuller Modified and Assembled Enclosures

Once you have explored our vendor options and are ready to develop a customized enclosure, call us at (503) 233-5341 or email us and we will assist you.

A sample of custom enclosure setups via Hammond Mfg.

Value-Added solutions for any project

While we have the right parts at the right price, we also have your team's back with a suite of Value-Added services that are primed to take your project to the next level.

Ranging from custom sets of fully kitted components, factory quality custom enclosures with precise drill points and cutouts, custom tool kits and label printing, DIN Rail Layout Assembly Drawings (to scale!), and sub-assemblies to fully designed, assembled, and wired DIN Rails or complete control enclosures; our Value-Added service team is ready to assist you.

Worth considering is the cost saving of not having to modify equipment on the fly or at the job site. We can have everything designed "plug-n-play" and ready for install.

With an extensive track record delivering high quality value-added services to numerous high-end OEMs (including Portland Kettle Works) and local government agencies (ODOT), we are confident we can remove any pain points and move your project forward.

As the world continues to open up, go beyond the components, and look to URS' value-added service suite as a one-stop shop for your next project. For more information call us at (503) 233-5341 or email us here.

Coming soon: An overview of our enclosure customization options including custom fit drilling and screen printing.

Single part number custom interface boards and modules are just one of our value-added options available for your future projects.

A random, New Year’s walk through our line card.

Automation and DIN Rail 

Weidmuller has your automation and DIN rail needs covered with terminal blocks, circuit breakers, relays (like the TERMSERIES shown above), power supplies, fuse blocks, tools, and more – all looking for their forever homes.

TFI series timing relays in-stock at URS (picture reference above):

7-function relay (part no. 2697250000) - TFI-SERIES, Multifunction timing relay, with separate control input, Number of contacts: 1, CO contact, AgNi, Rated control voltage: 12...240 V UC -10 % / +10 %, Continuous current: 8 A, Screw connection.

On-Delay only relay (part no. 2697280000) - TFI-SERIES, On-delay timing relay, Number of contacts: 1, CO contact, AgNi, Rated control voltage: 24...240 V UC -15 % / +10 %, Continuous current: 8 A, Screw connection.

Value-added

URS can provide your team with a full range of Value-Added Services from custom sets of fully kitted components, custom tool kits, DIN Rail Layout Assembly Drawings (to scale!), and sub-assemblies to fully designed, assembled, and wired DIN Rails or complete control enclosures.

CCTV for extreme conditions

ExSite® Enhanced Explosion Proof Camera System: "From the relentless sub-zero temperatures of Arctic oil pipelines, to the scorching heat of desert drill sites, to the high wind and corrosive elements of ports and offshore rigs, Pelco has engineered a camera line robust enough to operate in the most hazardous environments imaginable." 

Audiovisual solutions

Check out our new Vanco line of products starting with the HDMI-USB Capture (part no. HDCAPT1), which converts an HDMI signal into content that can be recorded and/or streamed.

DIY & Maker Supplies

Get your DIY projects started with breadboards, jumper wires, Arduino and Raspberry Pi SBC's with a wide selection of modules, development boards, and components (resistors, LEDs, capacitors, transistors, ICs - the list goes on).

Check out what's in stock at www.urseleshop.com

Electronics cleaning

We have a ton of Caig Labs DeoxIT solutions, dusters, lithium grease, screen cleaners, etc. - ALL ready to clean contacts, lubricate faders, and do everything else necessary to keep things functional.

Tools

Contractors take note - we have a large selection of tools in stock at any time, including Klein Tools' 15-in-1 Multi Bit Ratcheting Screwdriver. Crimpers, strippers, drivers, pliers, sheer cutters, and more are all looking for a space in your tool kit. 

Wire & Cabling

Whether it is Cat6, Cat5, plenum, shielded, multiconductor, microphonic, control - we have the wire and cable you need for you project. Shown above is the Belden 8412 2C microphone cable which we will cut by the foot * and pairs well with our Neutrik and Switchcraft XLR connectors. 

*wire cut by the foot is available for select microphone and instrument cable only. 

Switches, Pilot Lamps, and accessories (a poem)

Scratch your pole and throw itches,
With Autonics modular switches;
where each switch (or pilot) lamp whether yellow, red, or green,
can be configured for the job of your dreams.

If theses switches do not fit the bill at hand,
we have numerous options to meet your demands!

*I’ll show myself out.

Germ-Fogger™ - URS' Value-Added team lends a hand on Portland Kettle Works new decontamination dynamo

Recently, Brian Leschorn, URS Product Manager, and value-added team lead, helped solved some problems that Thad Fisco and his experienced team at Portland Kettle Works were having during the development of the Germ-Fogger™, a revolutionary new industrial grade disinfecting system. In the age of Covid-19, the PKW team developed the Germ-Fogger™ out of the need to decontaminate their own craft brewery and coffee bar. While originally intended only for sale to PKW’s clients, the Germ-Fogger™ is now slated for release to the wider market.

Leschorn, was brought in during the later design stages to help come up with a specific switch that would satisfy their team’s requirement for a motor-rated On/Off Switch. In addition, he worked up three power inlet options, with and without input line cord, and a J-Box (Value-Added option) before their team decided on an Inlet Only solution from Marinco.

Now ready for prime time, the website advances that the Germ Fogger™ is the state of art atomizing system that employs vortecular™ spray control for more consistent application of EPA approved disinfecting agents, and judging from this video, we cannot argue with that. We recommend visiting the Germ-Fogger™ website to learn the full range of its abilities and applications.

In these unprecedented times, the Germ-Fogger™ looks like a sure bet decontamination dynamo in the ongoing battle to against the spread of Covid-19. For our part, we are pleased that our value-added team could lend a hand in its development.

If you or your team need industrial grade decontamination, check out the Germ-Fogger™ stat!   

To find out what our Value-Added team can do to get your project moving, call us at 503-233-5341 or send an email inquiry to sales@ursele.com. Take care out there.

Hero shot of the Germ-Fogger™, the URS provided switch and inlet can be seen in the back right of the unit. 

The Germ-Fogger™ makes easy work of playground equipment.