Weidmuller RockStar® Moduplug "Great performance in the smallest of spaces"

Weidmuller's RockStar® ModuPlug sets new standards for modular connector systems. To put it simply, they solve the omnipresent space problem by offering increased functionality over reduced installation space requirements. These features in turn reduce the overall weight and by extension, cost

If you are unfamiliar with the term modular connector system - it is a system consisting of individual modular connectors - each modular connector either an input or output - that connects electrical devices within a network. Sometimes these connector systems have limited space requirements while needing to maintain a large number of connections - picture a maintenance shed loaded with water pumps, relays, temperature controls, gate controls, and other equipment miles from the main pumping station. In this case, the RockStar® ModuPlug is well-suited to work within tight spaces due to its high density of contacts within a smaller form factor compared to the industry standard.

Bottom line: When you have those modules populated then make that final connection in a shed miles from nowhere and all of the machinery whirs ON for a job a well done …you are truly a RockStar®, and the plug is pretty cool too!

Here are some of the ways the RockStar® lives up to its name:

  1. The Pitch size is halved thus doubling the number of module spaces and therefore increasing functionality.

  2. Power to weight ratio – the 100 A module is available in a “Single Plus 1.5” width which is narrower than the market standard. This allows for more modules over the same space versus the standard size. In addition, there are even smaller frames and enclosure sizes to save additional space and weight.

  3. More signals over less space/weight – Higher contact density. The double HD 36 has 36 signal contacts (rated at 250 V), 50% more than the market standard.

And all this with more convenient installation!

In-depth analysis and product information on the RockStar® ModuPlug can be found here.

For more information on Weidmuller products, please contact your inside sales representative or give us a call at 503-233-5341.

A random, New Year’s walk through our line card.

termseries.png

Automation and DIN Rail 

Weidmuller has your automation and DIN rail needs covered with terminal blocks, circuit breakers, relays (like the TERMSERIES shown above), power supplies, fuse blocks, tools, and more – all looking for their forever homes.

timers.jpg

TFI series timing relays in-stock at URS (picture reference above):

7-function relay (part no. 2697250000) - TFI-SERIES, Multifunction timing relay, with separate control input, Number of contacts: 1, CO contact, AgNi, Rated control voltage: 12...240 V UC -10 % / +10 %, Continuous current: 8 A, Screw connection.

On-Delay only relay (part no. 2697280000) - TFI-SERIES, On-delay timing relay, Number of contacts: 1, CO contact, AgNi, Rated control voltage: 24...240 V UC -15 % / +10 %, Continuous current: 8 A, Screw connection.

value added.png

Value-added

URS can provide your team with a full range of Value-Added Services from custom sets of fully kitted components, custom tool kits, DIN Rail Layout Assembly Drawings (to scale!), and sub-assemblies to fully designed, assembled, and wired DIN Rails or complete control enclosures.

exsite.png

CCTV for extreme conditions

ExSite® Enhanced Explosion Proof Camera System: "From the relentless sub-zero temperatures of Arctic oil pipelines, to the scorching heat of desert drill sites, to the high wind and corrosive elements of ports and offshore rigs, Pelco has engineered a camera line robust enough to operate in the most hazardous environments imaginable." 

hdcapt.jpg

Audiovisual solutions

Check out our new Vanco line of products starting with the HDMI-USB Capture (part no. HDCAPT1), which converts an HDMI signal into content that can be recorded and/or streamed.

pi4.png

DIY & Maker Supplies

Get your DIY projects started with breadboards, jumper wires, Arduino and Raspberry Pi SBC's with a wide selection of modules, development boards, and components (resistors, LEDs, capacitors, transistors, ICs - the list goes on).

Check out what's in stock at www.urseleshop.com

deox.jpg

Electronics cleaning

We have a ton of Caig Labs DeoxIT solutions, dusters, lithium grease, screen cleaners, etc. - ALL ready to clean contacts, lubricate faders, and do everything else necessary to keep things functional.

15in1.jpg

Tools

Contractors take note - we have a large selection of tools in stock at any time, including Klein Tools' 15-in-1 Multi Bit Ratcheting Screwdriver. Crimpers, strippers, drivers, pliers, sheer cutters, and more are all looking for a space in your tool kit. 

8412.png

Wire & Cabling

Whether it is Cat6, Cat5, plenum, shielded, multiconductor, microphonic, control - we have the wire and cable you need for you project. Shown above is the Belden 8412 2C microphone cable which we will cut by the foot * and pairs well with our Neutrik and Switchcraft XLR connectors. 

*wire cut by the foot is available for select microphone and instrument cable only. 

autonics sw.png

Switches, Pilot Lamps, and accessories (a poem)

Scratch your pole and throw itches,
With Autonics modular switches;
where each switch (or pilot) lamp whether yellow, red, or green,
can be configured for the job of your dreams.

If theses switches do not fit the bill at hand,
we have numerous options to meet your demands!

*I’ll show myself out.